Wolf's Chemicals Nano Paint Sealant Hard Body 150ml

Wolfs Chemicals “Hard Body” SiO2 premium paint coating is the ideal solution for those seeking unmatched gloss, depth and reflectivity for their cherished automobiles.

The amazing hydrophobic properties, protection against the elements (bird droppings, road grime, road salts, harsh chemicals) and durability are what make “Hard Body” truly shine though.
May be applied by hand or via DA with a finishing pad. 

DIRECTIONS

For best results, clean the surface.
With a foam applicator, clean cotton pad, piece of microfiber, or via DA with a finishing pad apply a thin layer of product to the surface with thorough, overlapping motions.
Allow to dry for 15- 30 minutes and remove residue with a cleaner microfiber towel.
To ensure 100% coverage and for added protection and shine, a second layer is recommended and after a minimum of 3 hours curing time. Full curing/hardening time is 72 hours.
During the first 24 hours do not allow the surface to get wet, as this will affect the curing process.
Suggested temperature of application is +12 degrees C.
Do not apply to a hot surface or in direct sunlight

Wolf's Nano Paint Sealant will form a super-hydrophobic, self-cleaning shield on paint surfaces. This product is especially useful on paint surfaces where strong surface protection is paramount. This coating forms a layer of protection that is approximately one molecule thick (1 nanometer = 1^{– 9} meter = 10^{– 6} micrometers), as the average size of an atom is 0.2 – 0.5 nanometers thick.

A single nano treatment consists of 3 layers: The first or “bonding layer”, forms the foundation of the coating by becoming part of the substrate itself. Being that this layer actually becomes a permanent part of the surface it's being applied to, this SiO₂ or “quartz/glass” layer will protect from the elements for an exceptionally long period of time.

The second “filler layer” anchors to the “bonding layer” and fills the gaps between nano particles to form a homogenous nano surface, which is necessary for the last layer to form properly.

The third “hydrophobic layer” bonds to the previously formed layer and provides the surface roughness which creates the hydrophobic lotus effect.

Properties of a  super-hydrophobic (nano) coating:

1. The coating itself is very thin, circa 1 nanometer thick, which can not be seen by the naked eye
2. The coating forms a very strong bond to the surface and the “bonding layer” is quite difficult to remove
3. The coating does not “layer”, meaning that adding several layers will not “build” or make a thicker coating. In other words, it will not adhere to itself.
4. The coating will repel water and dirt/contamination will not form a strong bond to the treated surface. 

In cold weather, the hydrophobicity of nano coatings may decrease. In these conditions, the moisture in the air tends to form a dense layer of moisture on the surface which can “stick” to the surface and prevent water drops from forming because of the constant moisture in the air. The warm air of nano coating improves.

Nano coating a new vehicle​:

Nano coatings can be applied to new vehicles in 2 steps. The first step is to polish the paint with nano glaze “The Hybrid” with a finishing pad in order to clean any contamination that resides in the paint, to smooth out the surface and to lay the foundation of nano particles for the nano coating itself. You will see a vast improvement in gloss and reflection after this step and this is even on new paint

The second step is to apply the nano coating, either “Hard Body” or “Bodyguard”, which will strengthen the coating and will provide the upper and hydrophobic layer of protection. 

Nano coating a used vehicle:

This can be achieved in three steps. The first step is to polish the vehicle, which will remove scratches from the paint (prior compounding may be necessary), smooth out the surface and create a foundation for the nano particles. The second step is to glaze the paint with nano glaze “The Hybrid”. This step will form the middle “glass” layer of protection on the vehicle. The last step is to coat the vehicle with either “Hard Body” nano coating to lay last, hydrophobic layer of protection. Following these steps will ensure the strongest bond of the coating and will provide the best durability and shine.